Rear axle blanket/diaper required on all TF starting at Charlotte? (9 Viewers)

Why wouldn't it be possible to have a lubricant that is not so thick? Just for yuks & grins, the motor oil we run in our daily drivers is a lot thinner than we usta use back in the '60's, as an example, but works great.
 
Why wouldn't it be possible to have a lubricant that is not so thick? Just for yuks & grins, the motor oil we run in our daily drivers is a lot thinner than we usta use back in the '60's, as an example, but works great.
It’s not as great as you think. Plus, the engines are built way different than they used to be, and the manufacturers have mileage requirements they have to try to meet. Engines don’t last nearly as long as they used to.

These rear ends go though a tremendous amount of shock. Before the issues, a ring and pinion still didn’t last much more than 50 runs. Now they are seeing much less than that. Using a thinner/less slick gear oil will only make things worse. Much worse.
 
It’s not as great as you think. Plus, the engines are built way different than they used to be, and the manufacturers have mileage requirements they have to try to meet. Engines don’t last nearly as long as they used to.

These rear ends go though a tremendous amount of shock. Before the issues, a ring and pinion still didn’t last much more than 50 runs. Now they are seeing much less than that. Using a thinner/less slick gear oil will only make things worse. Much worse.
More horsepower will solve all problems
 
It’s not as great as you think. Plus, the engines are built way different than they used to be, and the manufacturers have mileage requirements they have to try to meet. Engines don’t last nearly as long as they used to.

These rear ends go though a tremendous amount of shock. Before the issues, a ring and pinion still didn’t last much more than 50 runs. Now they are seeing much less than that. Using a thinner/less slick gear oil will only make things worse. Much worse.
What engines don’t last as long as they used? Are you talking OEM?
Today’s automotive engines are precision machined, hence the need for 0-20w oils, not straight 30 or 40 weight in the older engines.
You must not remember when 50k miles was a major accomplishment. But, you were living on borrowed time.
150k is not unusual these days.
 
More horsepower will solve all problems
I sense sarcasm , many will disagree, but I think a lot of spectators would say, more horsepower the last 5 years or more , has done more damage than good to the drag racing experience , in person anyway. A 2 hour delay in the show is a hard sell to a sponsor or attendee for any reason. I'm not trying to blame anybody, BTW , we all want National Events to be successful.
 
Last edited:

Users who are viewing this thread

Back
Top