Sonoma, Calif. – The Maddern Racing Team’s travels have brought them back to their home state of California. This weekend they are competing at Sonoma Raceway’s Regional event. Driver Chris Demke and the Peen Rite / OSI / 801 Racing Team are looking to strengthen their points totals, continue their assault on the time clocks, and win.
“Our runner-up at the Woodburn Regional was a letdown, we want more,” said Chris Demke. “We started out the season with two wins, won the Jegs AllStars in Joliet, and now it’s time to start another charge for the Championship.”
Going rounds and winning races takes planning and insight. The brain trust of crew chief Jerry Maddern, Kevin Watson, Michael Demke, Ron Mann, and tuner/clutch guy Adam Rhoades have the tune-up, and they are not afraid to use it. These past weeks of racing has gained them a handle on what it takes to go fast. It also takes support. This is why Maddern Racing is proud to announce that Boninfante Friction Products has come aboard as an associate sponsor. Their President, Rob Boninfante had this to say, “We are looking forward to helping out Maddern Racing and their run for the Championship.”
Running against the best of the rest in the Top Alcohol Dragster class has honed the attack of the Maddern Racing Team. It has also brought to surface their faults. Pulled out wires, broken parts, and missed opportunities have made them stronger. Getting these misfortunes out of the way at this point in the season may work to their advantage.
“We are still in the hunt, but now is the time we have to show our strengths,” said Demke. “Capitalizing on what we have done is only a part of it. Now we have to have the intestinal fortitude to make it happen. We all want this more than anything.”
Wanting something to happen is fine, seeing it through is another. It takes a bit of luck, perspiration, and most of all strength. Not so much physical strength, but the mental toughness that creates opportunities. If all of these factors come together, Chris Demke and the Maddern Racing team will reach their goals, and maybe another trophy tour. The Sonoma Regional is the next stepping stone waiting to be crushed.
...
About Peen Rite - Your source for quality shot peening, glass bead, and abrasive blasting services for over 45 years. We provide low cost solutions, high volume capacity, and a superior level of quality control. Equipped with many specialty machines designed to handle the cleaning and surface preparation for a wide variety of work pieces. PEEN-RITE gives you the ability to stay within your job cost estimation!
Operational Solutions will challenge itself on a daily basis to provide a unique advanced technical service to our customers. Our team will work to identify the problem, procure the necessary parts, and implement the solution. We will accomplish this with an expertise and professionalism unparalleled in the PET bottle industry. Operational Solutions provides products and services for the PET blow molding industry. We are the leading independent service and support organization for SIDEL, SIG, and Krones blow molding. We serve customers around the world from our facilities in Kansas City, Missouri and France. Visit us at: www.operationalsolutions.com
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 Racing -
Release courtesy of THR5 Communications
“Our runner-up at the Woodburn Regional was a letdown, we want more,” said Chris Demke. “We started out the season with two wins, won the Jegs AllStars in Joliet, and now it’s time to start another charge for the Championship.”
Going rounds and winning races takes planning and insight. The brain trust of crew chief Jerry Maddern, Kevin Watson, Michael Demke, Ron Mann, and tuner/clutch guy Adam Rhoades have the tune-up, and they are not afraid to use it. These past weeks of racing has gained them a handle on what it takes to go fast. It also takes support. This is why Maddern Racing is proud to announce that Boninfante Friction Products has come aboard as an associate sponsor. Their President, Rob Boninfante had this to say, “We are looking forward to helping out Maddern Racing and their run for the Championship.”
Running against the best of the rest in the Top Alcohol Dragster class has honed the attack of the Maddern Racing Team. It has also brought to surface their faults. Pulled out wires, broken parts, and missed opportunities have made them stronger. Getting these misfortunes out of the way at this point in the season may work to their advantage.
“We are still in the hunt, but now is the time we have to show our strengths,” said Demke. “Capitalizing on what we have done is only a part of it. Now we have to have the intestinal fortitude to make it happen. We all want this more than anything.”
Wanting something to happen is fine, seeing it through is another. It takes a bit of luck, perspiration, and most of all strength. Not so much physical strength, but the mental toughness that creates opportunities. If all of these factors come together, Chris Demke and the Maddern Racing team will reach their goals, and maybe another trophy tour. The Sonoma Regional is the next stepping stone waiting to be crushed.
...
About Peen Rite - Your source for quality shot peening, glass bead, and abrasive blasting services for over 45 years. We provide low cost solutions, high volume capacity, and a superior level of quality control. Equipped with many specialty machines designed to handle the cleaning and surface preparation for a wide variety of work pieces. PEEN-RITE gives you the ability to stay within your job cost estimation!
Operational Solutions will challenge itself on a daily basis to provide a unique advanced technical service to our customers. Our team will work to identify the problem, procure the necessary parts, and implement the solution. We will accomplish this with an expertise and professionalism unparalleled in the PET bottle industry. Operational Solutions provides products and services for the PET blow molding industry. We are the leading independent service and support organization for SIDEL, SIG, and Krones blow molding. We serve customers around the world from our facilities in Kansas City, Missouri and France. Visit us at: www.operationalsolutions.com
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 Racing -
Release courtesy of THR5 Communications
