Bobby Lagana Gearing Up For 2008 (1 Viewer)

<img src="http://www.nitromater.com/gallery/files/5/laganaheadshot1.jpg" alt="laganaheadshot1"align="right"borders="0" />
BOBBY LAGANA GEARING UP FOR 2008
Team Torco Sorting out the Bugs before IHRA Start

VALDOSTA, Ga (Mar. 10, 2008) – Fan favorite and long time IHRA Top Fuel pilot, Bobby Lagana Jr. is working hard to get set for the IHRA start in just a few weeks. After joining forces with Clay Millican, the team has been preparing for the 2008 race season with a new car, expanded team, and big expectations.

“It’s been a rollercoaster for sure,” said Lagana. “That would be a perfect description. Two weeks ago, there was a car in the rafters at Clay [Millican’s] shop. We showed up at the end of last week ready to run, and made our first lap. Everything worked, and the car got to 400 ft, 500 ft fine. There was a couple of indications there was a clutch problem but we didn’t pursue it any. Then we made our second lap and the clutch problems got worse. We just had to sort through all that was here and that wasn’t here and work with Lance Larsen knows. A lot of this stuff everyone went into this blind. We found the glitch fixed it and went out there and wow. We found the problem, fixed the problem and went out there last night. It didn’t do what it was doing the previous two runs anymore and it acted pretty much kind of normal. Just the driver acted like an idiot. I don’t know, it’s just one of those things. We hurt a motor and didn’t need to hurt it. I believe now, we’re actually in really good conditions now. Just the driver has got to get over all the flogging from the crew.”

With some test laps under his belt, Lagana is focusing on the positive. In just a few short weeks the team will head to San Antonio for the first IHRA race, and they are going with the intentions of winning this season. The team, formerly based in New York, has also been busy with a shop relocation to Drummonds, Tennessee . With a winter move to join forces with NHRA driver Clay Millican, and utilizing his turning talent with Johnny West and Lance Larsen, Lagana feel’s the season will be a good one for him and his Torco Racing Fuel, Seelye Wright, Knoll Gas Motorsports Top Fuel Dragster.

Lagana went on to say, “I think we’re in really good shape. We can’t be in bad shape with Johnny West, Lance Larsen, and Clay Millican in charge with all these crew guys. Dyno Dave came out to give us a hand this weekend with his whole family. I think we’re in really good shape. I don’t know what the plans are. I never know what’s going to happen because there is so much stuff to sort out to be 100% confident. I think we’re in really good shape. I’m happy and just hope everybody is happy up in Decatur , Michigan and that everyone has a good time.”

For more information on this story or any other story concerning Knoll Gas Motorsports or Torco Racing Fuels, Inc. please contact Amy Johnson, Public Relations Representative.

MORE ABOUT TORCO RACING FUEL

Torco Racing Fuels is the manufacturer of high performance racing and power products. Torco Racing Fuels is the engine builders & pros choice for extreme power and consistency of our blend stock. Dynos and racetracks have witnessed the controlled burn and quantum power released in this Mach Series Designed Fuel. Records will be set and heads will turn. A new paradigm of thought went into the development and chemistry at the base of these fuels, assuring that peak cylinder pressure is maintained by the critical timing of fuel releasing its maximum energy potential. There are 21 grades of high performance fuels available for all types of applications.

Our power products are packaged, making them available to be shipped directly to your doorstep or through our distributors for your convenience. We ship UPS daily.

For further assistance with your racing needs, please contact us directly or check out torcoracefuel.com for the distributor nearest you.

Mach Series Racing Fuels are available in 5 Gallon Pails, 55 gallon containers, bulk-transport loads, and 30 Thousand Gallon Rail Cars.
 
Ways To Support Nitromater

Users who are viewing this thread


Back
Top